ReadyMadeRC
STROBON NAVIGATION STROBE (BLUE) WITH WIRE
,
It’s really a powerful strobe with low power consumption (50mA ...ReadyMadeRC
CUSTOM FPV STARTER PACKAGE: 1.3GHZ
,
Please use the new starter packages, international or US version ...ReadyMadeRC
EZOSD WITH XT60 STYLE POWER PLUGS
| EzOSD | The FPVers OSD |
| After-flight debriefing, shows a summary of the flight | Max. altitude, max. distance, max. speed, average speed, distance flown, etc. |
ReadyMadeRC
URS - 20A 5000VOLT OPTICALLY ISOLATED RELIABLE SWITCH
,
URS is most reliable RC switching system on the RC ...ReadyMadeRC
PENGUIN V2 KIT +M2815 MOTOR (HARDWARE INCLUDED, NO ELECTRONICS)
| Wingspan | 1720MM/67.7inch |
| Length | 1230MM/48.5inch |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
| ESC | 40A for M2220 or 60A for M2815 |
| Servo | 3pcs 17g servo+ 1pcs 9g servo. |
| Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 |
| Static Thrust | Motor M2220 1.5Kg/53.0oz. |
| Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
| Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
| Part No | FUP1201 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
| Part No | FUP1202 |
| Part No | FUP1203 |
| Part No | FUP1204 |
| Part No | FUP1205 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, , WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount. There are a few choices sold separately:, , Penguin Packages Available:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
Penguin Kit +M2815 Motor Motor M2815 1.95kg/69oz, Max.flight weight more ...ReadyMadeRC
PENGUIN V2 KIT +M2220 MOTOR (HARDWARE INCLUDED, NO ELECTRONICS)
| Wingspan | 1720MM/67.7inch |
| Length | 1230MM/48.5inch |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
| ESC | 40A for M2220 or 60A for M2815 |
| Servo | 3pcs 17g servo+ 1pcs 9g servo. |
| Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 |
| Static Thrust | Motor M2220 1.5Kg/53.0oz. |
| Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
| Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
| Part No | FUP1201 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
| Part No | FUP1202 |
| Part No | FUP1203 |
| Part No | FUP1204 |
| Part No | FUP1205 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, , WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount. There are a few choices sold separately:, , Penguin Packages Available:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
Penguin Kit with M2220 Motor Motor M2815 1.95kg/69oz, Max.flight weight ...ReadyMadeRC
PENGUIN V2 ARF WITH M2220 MOTOR AND 40A ESC
| ATTENTION | According to |
| Wingspan | 1720MM/67.7inch |
| Length | 1230MM/48.5inch |
| Wing Area | 36dm/3.9ft2 (Mainwing Area) |
| Motor | Brushless motor M2220 Kv1350 or M2815 KV1280 |
| ESC | 40A for M2220 or 60A for M2815 |
| Servo | 3pcs 17g servo+ 1pcs 9g servo. |
| Battery | Li-Po 11.1V 2400 mAh for M2220 and 5000mAh for M2815 recommended |
| Static Thrust | Motor M2220 1.5Kg/53.0oz. |
| Payload | 600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight) |
| Material | EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe |
| Part No | FUP1201 |
| 17gServo | 3PCS/ 9g servo |
| Propeller 9060 | 1PCS |
ARF Weight: 0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices, Forum Discussions:, RCGroups, WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount. There are a few choices sold separately:, , Finwing Penguin Features:, , Airplane flight video please visit:, www.youtube.com/user/Finwingtube, More high definition photos visit:, www.flicker.com/photos/finwing,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
8W V6 PRO BOOSTER FOR 433MHZ DIGITAL SYSTEMS
| FEATURES of V5 | added safety and security |
Vin, Current in, RF Power Out, Efficiency:, 9.0V 2.58A 9.12W 39% DO NOT GIVE UNIT OVER 8V, Different cable types have different loss, here is the max length allowed using different cables:, RG-58CU 18meters (59ft), Old 3xx rx firmware:, The ultra sensitive receiver will be blocked/jammed if distance to booster antenna is under 10-20meters so avoid that !, NEW 307-308 or higher RX firmware:, No more blocking problems, an RX can be as close as 25cm (10 inch) from a booster at 7W before minor blocking is detected., WARNING:, Power supply MAX is 8.4V, max supply current 2.5A, newer ever exceed that., Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Here is the NEW PA Booster version 6 PRO, again ...ReadyMadeRC
OSD PRO EXPANDER
All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointing indicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”. And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”. Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder,
The OSD Pro is a powerful, modular, fully configurable Video/Audio ...ReadyMadeRC
10.1 INCH RMRC LCD MONITOR
| Image | 10.1" TFT LCD LED Backlit |
| Resolution | 1024x600 |
| Horizontal frequency range | 30-98KHz |
| Field frequency range | 60-75Hz |
| Brightness | 450cd/m² |
| Viewing Angle | 70°/70°(L/R) 40°/50°U/D |
| Contrast Ratio | 500 |
| Response time | 8ms |
| Input Voltage | DC7-18V |
| Power Consumption | ≦10W |
| Input Signal | VGA,AV1,AV2,Audio,HDMI |
| Working Temperature | -20℃～60℃ |
| Storage Temperature | -30℃～70℃ |
| Size | 255L×163W× 34D mm |
| Weight | 544g without cables or sun shield, 875g with cables and sun shield |
| Mounting | Standard 1/4-20 tripod and VESA mounts |
Specifications:, Display Ratio: 16:9, Package Includes:, 10.1" LCD Monitor,
NOW 450cd/m² brightness! Perfect for your FPV ground station, this ...ReadyMadeRC
IBCRAZY 433/1.3 NOTCH FILTER
,
Notch filter from IBCrazy. Use this on your 433MHz RC ...ReadyMadeRC
8 INCH RMRC LCD FPV MONITOR
| Display Ratio 16 | 9 (stretch selectable) |
| Contrast Ratio | 500 |
| Response Time | 15ms |
| Working Temperature | -20C-60C |
| Storage Temperature | -30C-70C |
| Weight including sun shield | 1.37lb |
| Outside dimensions | 8.2"W, 5.78"H, 1.37"D (209x147x35mm) |
Includes:, 8" Monitor,
The new Ready Made RC 8 inch LCD monitor is ...ReadyMadeRC
RMRC 5A POWER REGULATOR - 5 TO 6 VOLT (UBEC) WITH SWITCH
| Output | 5v or 6v(Selectable via jumper) 5A continuous, 7.5A burst |
| Input | 6.6v-32v (2-7S Lipo) |
| Size | 40x22x7 mm |
| Weight | 26g with included cables and switch |
Specifications:, ,
High Quality Ready Made RC, LLC 5A UBEC w/ Noise ...ReadyMadeRC
PRO CAMERA PAN AND TILT KIT
| Manual | Pro Pan/Tilt Module |
Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., Note: Currently the back plates are designed for the pan/tilt system being installed on top of the aircraft. If you plan on mounting the assembly inverted under the aircraft, some modifications to the back plate may be required., This kit includes:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required. The system was designed for the servos listed in the options below. Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, ,
This is the new carbon reinforced plastic pan/tilt FPV module ...ReadyMadeRC
DJI WOOKONG MULTI (WK-M) MULTIROTOR CNTRL
| Built-In Functions | Autopilot, Auto Hover Fail Safe |
| Multi Rotor Types | Quad-Rotor, Hex-Rotor, Octo-Rotor |
| Supported ESC output | 200Hz refresh frequencys |
| Recommended Transmitter | PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels |
| Recommended Power Supply | DC 4.8 ~ 12V |
| Power Consumption | MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V) |
| Hovering Accuracy | Vertical |
| Suitable Wind Condition | < 8m/s (17.7mph) |
| Max Rotate Angle | 30° |
| Vertical Speed | 3m/s |
| Total Weight | <= 150g |
| Dimensions | Main Controller |
| IMU | 40mm x 31mm x 26mm |
| GPS & Compass | 50mm (diameter) x 9mm |
| LED Indicator | 25mm x 25mm x 7mm |
Introduction:, , Features:, , Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.),
DJI Wookong Multi-Rotor stabilization controller is a complete flight system ...